Construction

New Line of Epoxies for the Automobile and Trucking industry

Dynamis announces the release of its new protective adhesives, metal and epoxy coatings for the automobile and trucking industry. This line of epoxies is composed of metal filled mastic, 100% solids epoxy bonding compound, epoxy coating, epoxy resin and epoxy for fiberglass repair.

Dynapoxy New EPO Adhesive is specifically formulated to adhere to most common surfaces. This product is a unique epoxy resins in the industry as it has the capacity of repairing gas tanks and metal tanks, as well as car / truck radiators. In addition, the New EPO Adhesive is ideal for pipe and crankcase.

Dynamis automobile epoxy line includes the FR-3 Repair Kit designed to repair and reinforce rusted or damaged floor and trunk panels in antique automobiles. “As an antique car hobbyist, I noticed a lack of products to restore certain part of antique cars, either not adapted to the specific automobile parts or very costly. This is why we formulated a specific line of epoxy adhesives, resins and coatings that respond to every automobile needs“ says John Caramanian, President of Dynamis. The epoxy, adhesive and coating line includes many products that are easy to apply, chemical resistant, sagging free, and weather resistant. “We always innovate and our epoxy product line for the automobile and trucking industry is continually expending. We also offer custom formulation if products are not currently available” says Caramanian.

For additional information on Dynamis new line of epoxies for the automobile and trucking industry, contact Eric DeGrave / Nadia Vizza or visit www.dcdynamis.com. All epoxy products are user-friendly, no blush, no-sag, no shrinkage, corrosion resistant, fresh water and salt water
resistant, custom formulated, chemical resistant, solvent-free, non-flammable, low/no odor, interior & exterior durability, wear resistant, weather proof and stain resistant. 

ABOUT DeCara, Inc. dba Dynamis – Inventor, innovator and manufacturer of epoxies, epoxy coatings and adhesive, and epoxy resins for over 50 years. DeCara, Inc. headquarters is located on the Florida Gulf Coast Area in Venice. Dynamis strives for quality in their products and services. Dynamis offers a complete line of epoxies ranging from adhesives, coatings, paint, resins, sealers and compounds from the automobile industry to the marine, electrical or construction industry. Dynamis continuously innovates by offering custom epoxy products to fulfill the most unique needs. Dynamis epoxies are tested under specific conditions before being released publicly.

For more information about Dynamis, please visit www.dcdynamis.com

About the Author

Nadia Vizza of CSS Innovation, is a consultant for dcdynamis.com an epoxy manufacturer located in Venice Fl

ArtResin.com – Thick, Glossy, Clear Coat on your Paintings (Epoxy Resin)

125 Resin Proset Laminating Epoxy Resin .98GA $118.94 125 Resin Proset Laminating Epoxy Resin .98GA Pro-Set 125 Resin – PROSET LAMINATING EPOXY RESIN .98GA

125 Resin Proset Laminatng Epoxy Resin 4.29GA $439.94 125 Resin Proset Laminatng Epoxy Resin 4.29GA Pro-Set 125 Resin – PROSET LAMINATNG EPOXY RESIN 4.29GA

Mas Epoxy Flag Epoxy Resin Resin, Quart $37.99 Mas Epoxy Flag Resin Resin, Quart . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Low Viscosity Resin Qt. Low Viscosity Epoxy Resin $33.99 Low Viscosity Resin Qt. Low Viscosity Epoxy Resin MAS Epoxies Low Viscosity Resin – QT. LOW VISCOSITY EPOXY RESIN

Low Viscosity Resin 4-Gal. Low Viscosity Epoxy Resin $388.99 Low Viscosity Resin 4-Gal. Low Viscosity Epoxy Resin MAS Epoxies Low Viscosity Resin – 4-GAL. LOW VISCOSITY EPOXY RESIN

Low Viscosity Resin Gal. Low Viscosity Epoxy Resin $99.99 Low Viscosity Resin Gal. Low Viscosity Epoxy Resin MAS Epoxies Low Viscosity Resin – GAL. LOW VISCOSITY EPOXY RESIN

Low Viscosity Resin 1/2Gal. Low Viscosity Epoxy Resin $62.99 Low Viscosity Resin 1/2Gal. Low Viscosity Epoxy Resin MAS Epoxies Low Viscosity Resin – 1/2GAL. LOW VISCOSITY EPOXY RESIN

West System #105 Epoxy Resin A Resin, Qt. $37.99 West System #105 Epoxy Resin A Resin, Qt. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. We strongly recommend the use of WEST SYSTEM dispenser pumps.

Mas Epoxy Flag Resin Resin, 55 Gal $3978.99 Mas Epoxy Flag Resin Resin, 55 Gal . The premiere resin for: Filleting Laminating Gluing We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs.F.L.A.G. Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. F.L.A.G. is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. F.L.A.G Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. F.L.A.G Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Data SheetMeasured Properties Impirical Calculations or Physical Properties Resin Viscosity 3000-3400 cps Hardness Please Call Factory For More Information. Color 1 Gardener Max Tensile Strength EEW 190-200 Tensile Elogation Tg 140oF Compressive Strength Mix Ratio 2:1 Resin:Hardener

Mas Epoxy Flag Resin Resin, 30 Gal $2439.99 Mas Epoxy Flag Resin Resin, 30 Gal . The premiere resin for: Filleting Laminating Gluing We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs.F.L.A.G. Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. F.L.A.G. is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. F.L.A.G Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. F.L.A.G Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Data SheetMeasured Properties Impirical Calculations or Physical Properties Resin Viscosity 3000-3400 cps Hardness Please Call Factory For More Information. Color 1 Gardener Max Tensile Strength EEW 190-200 Tensile Elogation Tg 140oF Compressive Strength Mix Ratio 2:1 Resin:Hardener

Mas Epoxy Flag Epoxy Resin Resin, 4 Gallons $427.99 Mas Epoxy Flag Resin Resin, 4 Gallons . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Mas Epoxy Flag Epoxy Resin Resin, 1/2 Gallon $69.99 Mas Epoxy Flag Resin Resin, 1/2 Gallon . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Mas Epoxy Flag Epoxy Resin Resin, 1 Gallon $109.99 Mas Epoxy Flag Resin Resin, 1 Gallon . We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a “medium” body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener. Measured Properties Resin Viscosity 3000 3400 cps Color 1 Gardener Max EEW 190 200 Tg 140 F Mix Ratio 2:1 Resin to Hardener Peak Exotherm (30g batch) 360 F Pot Life (30g batch) 15 minutes

Interlux Epiglass Epoxy Resin Resin, Pump (for Gallon) $37.99 Interlux Epiglass Epoxy Resin Resin, Pump (for Gallon) . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Brush or roller

Interlux Epiglass Epoxy Resin Resin, Gallon $112.99 Interlux Epiglass Epoxy Resin Resin, Gallon . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Brush or roller

Interlux Epiglass Epoxy Resin Resin, Quart Kit $49.99 Interlux Epiglass Epoxy Resin Resin, Quart Kit . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Brush or roller

General Purpose Epoxy Resin Quart $35.94 General Purpose Epoxy Resin Quart A 100% solids, medium modulus epoxy system, that works well in 90% of all epoxy applications. It is great for wood construction and repair, gel coat blister repair, and general fiberglass work. Use at a simple 2:1 ratio with any of three hardeners – allowing excellent pot life and cure-time control. Can be used at temperatures as low as 35F with no limitations on humidity. When selecting a hardener, consider the minimum temperature expected during application and the required pot life. If required, a mixture of 2 hardeners will provide extra fine tuning for cure times. The medium-low viscosity of System Three General Purpose Epoxy allows for use as is for coating and fiberglass work. Combine with different fillers to make excellent adhesive, filleting and fairing compounds. A selection of hardeners provides complete control of pot life and cure times At 77 a 100 gm mixture using 1 Hardener will gel in 15 min. and be tack-free in 2 hours At 77 a 100 gm mixture using 2 Hardener will gel in 30 min. and be tack-free in 4-6 hours At 77 a 100 gm mixture using 3 Hardener will gel in 60 min. and be tack-free in 9 hours Color: amber

Mas Epoxy Calibrated Resin Pump Set $15.99 Mas Epoxy Calibrated Resin Pump Set . Contains both the 8cc and 4cc pumps. For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.

West System #105 Epoxy Resin B Resin, Gal. $96.99 West System #105 Epoxy Resin B Resin, Gal. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. We strongly recommend the use of WEST SYSTEM dispenser pumps.

West System #105 Epoxy Resin Resin, 52.03 Gal $2992.21 West System #105 Epoxy Resin Resin, 52.03 Gal . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. We strongly recommend the use of WEST SYSTEM dispenser pumps.

West System #105 Epoxy Resin C Resin, 4.35 Gal. $376.99 West System #105 Epoxy Resin C Resin, 4.35 Gal. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. We strongly recommend the use of WEST SYSTEM dispenser pumps.

105 Epoxy Resin 1Qt 2.8 Lbs $28.94 105 Epoxy Resin 1Qt 2.8 Lbs 105 Resin is the base material of the West System family of products, on which all compounds are built. The resin is a clear, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, the 105 will fill gaps and bridge voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it possesses excellent thin-film characteristics to flow out and self-level with out fisheyeing. The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. Resin viscosity is approximately 1000 cps at 72F.

105 Epoxy Resin .98Gal 10.3 Lbs $81.94 105 Epoxy Resin .98Gal 10.3 Lbs 105 Resin is the base material of the West System family of products, on which all compounds are built. The resin is a clear, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, the 105 will fill gaps and bridge voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it possesses excellent thin-film characteristics to flow out and self-level with out fisheyeing. The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. Resin viscosity is approximately 1000 cps at 72F.

105 Epoxy Resin 4.35Gal 44 Lbs $354.94 105 Epoxy Resin 4.35Gal 44 Lbs 105 Resin is the base material of the West System family of products, on which all compounds are built. The resin is a clear, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, the 105 will fill gaps and bridge voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it possesses excellent thin-film characteristics to flow out and self-level with out fisheyeing. The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. Resin viscosity is approximately 1000 cps at 72F.

Interlux Epiglass Epoxy Resin Standard Hardener, Quart $47.99 Interlux Epiglass Epoxy Resin Standard Hardener, Quart . A 100% solids multipurpose epoxy resin for sealing gel coat and/or fiberglass laminate. This 2-part, high-build, clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction with InterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4 parts resin to 1 quart of hardener. Also available in an easy-to-use Quart Kit which includes 1 quart of resin, hardener and mixing cups. Pumps are available for gallon packs Formulation: 4:1 mix ratio (one squirt from each pump) Drying Time: Pot Life (100 grams): Fast Hardener: 45 min. 50F; 14min. 77F; 8 min. 90F; Std. Hardener: NR 50F; 27 min. 77; 11 min. 95 Coverage: 139sq.ft./qt.; 559sq.ft./gal. (varies according to usage) Total Time to Full Cure: Thin film cure (100 grams): Fast Hardener: 7 hrs. 50F; 2.5 hrs. 77F; 45 in. 95F; Std. Hardener: 50F NR; 3.5 hrs. 77F; 1.75 hrs. 95F Application Method(s): Brush or roller